logo friulair

Search form

Compressed air treatment

Reserved area FRIULAIR

You are entering the Restricted Area dedicated to Customer FRIULAIR.
Enter Username and Password in the fields below, and if you do not have this information, please register.

 



Request new password / Create new account

FTC SEPARATORS

COMPRESSED AIR SEPARATORS

Compressed air is a valuable source of power. It is safe, flexible and used in all areas of industry. Like any other energy source it benefits from being clean and free from impurities.

 

Pollutants often seen in compressed air are:  Lubricating oil carry over from air compressors; Atmospheric corrosive gases inhaled by the air compressor; Aerosols and vapours; Solid particles and rust from air main and receiver; Solid particles drawn in by the air compressor.

 

Often the effect of high temperatures and pressures will concentrate these
contaminants, forming acidic condensate. This condensate will cause corrosion
and problems for pneumatic equipment and quality problems for paint spraying etc.

 

Also, the oil carried over from the air compressor is not usually suitable for
lubricating downstream equipment and must be removed.

 
 

INNOVATIONS

FILTER HOUSING

Protected filter head and bowl threads to allow easy bowl removal for element replacement.

The large cross section of flow channels ensures reduced pressure drop.

Aluminum filter bodies are anodised inside and outside to prevent corrosion. External surfaces are powder coated.

Pressure relief device to allow safe removal of the filter bowl.

Hexagonal filter bowl clamp ring for easy of bowl removal.

 

SEPARATOR ELEMENT

The new cartridge TC with cyclone profile converts the FT filter models in efficient cyclone condensate separators. The new structure offers the access to the internal parts of the cyclone element for inspection and monitoring operations.

 

Cartridge type Air quality Application example
C SERIES - SEPARATOR
 
Cyclone separator capable to separate condensed water from compressed air. Normally installed at the outlet of the air compressor, at the end of compressed air pipes and before pre-filters.