logo friulair

Search form

Compressed air treatment

Reserved area FRIULAIR

You are entering the Restricted Area dedicated to Customer FRIULAIR.
Enter Username and Password in the fields below, and if you do not have this information, please register.

 



Request new password / Create new account

FW FILTERS

FLANGED FILTERS FOR HIGH FLOW RATES

FRIULAIR presenta i filtri flangiati, in acciaio al carbonio, della serie FW per le maxi portate d’aria compressa.

Vessel CE marked in accordance with PED 97/23/EC Directive. ASME Section VIII Div. 1 standard is also available.

 

Easy to read DIG04 differential pressure gauge, supplied as standard to monitor the filter element performance. Filter body is pre-treated inside and outside with electrophoretic coating; lower flange is provided with a hinge and handle mechanism to allow a single operator to open the vessel for replacement.

 
 

FOUR filtration grades

 

Filtration grade Air quality Application example
P SERIES - 5 MICRONS
green

 
Filter capable to separate emulsion and
particles down to 5 micron.
Normally used on outlet of dryers as (X) grade pre-filter. Used
to prevent the deterioration of the pipes of compressed air
plants, for surface treatment, on vacuum pump exhaust, on
compressed air motors, and as post-filter for adsorption dryers.
S SERIES - 1 MICRONS
red

 
Filter capable to separate particles down to
1 micron, liquid an oil included. Maximum
contents of residual oil 0,1 mg/m3.
Ultilizzato normalmente all'uscita dell'essiccatore come prefiltro per il grado (X). Utilizzato per preveire il deterioramento dei tubi inun impiato d'aria compressa, trattamenti superficiali, scarico pompe vuoto, motori ad aria compressa, postfiltro per essicatori ad absorbimento
X SERIES - 0.01 MICRONS
yellow

 
Oil removing filter capable to separate residual
oil and extremely small particles down to 0,01
micron. Maximum contents of residual oil 0,01
mg/m3. It produces air technically free from oil.
Used for the protection of control system, pneumatics
haulage, painting system and as pre-filter for adsorption
dryers.
Z SERIES - ACTIVATED CARBON
black

 
Activated carbon filter for the elimination
of oil vapours and odour. When installed,
after a (X) grade filter, it lowers the maximum
contents of residual oil 0,003 mg/m3.
Used in the pharmaceutical industry, for dental applications,
in photographic workshops, packaging and galvanic
treatments.

 

info & download

I dati prodotto sono disponibili solo per gli utenti registrati all'area riservata del sito.