logo friulair

Search form

Compressed air treatment

Reserved area FRIULAIR

You are entering the Restricted Area dedicated to Customer FRIULAIR.
Enter Username and Password in the fields below, and if you do not have this information, please register.

 



Request new password / Create new account

LF FILTERS

FILTERS FOR COMPRESSED AIR

Filters for compressed air, spin-on type. Interchangeable filter body, airflow rate up to 9.800 Nl/min. Maximum operating pressure 16 bar.

Four levels of filtration.

 

Friulair has designed disposable filter cartridges with the filter grade and the flow rate clearly mounted on the casing; maintenance is easy and reliability high.

 
 

INSTALLATION

1: Compressore
2: Tank
3: Pre-filter
4: By-pass
5: Dryer
6: Filter LFS
7: Filter LFX
8: Filter LFZ
9: Condensate drain

Four levels of filtration

Filtration grade Air quality Application example
P SERIES - 5 MICRONS Filter capable to separate emulsion and particles down to 5 micron Normally installed on the inlet of dryers. Ideal as pre-filter for on-line filters (series S – X – Z), and for vacuum pumps, pneumatic blowing plants.
S SERIES - 1 MICRONS Filter capable to separate particles down to 1 micron, liquid an oil included. Maximum contents of residual oil 0,1 mg/m3 Normally used on outlet of dryers as (X) grade pre-filter. Used to prevent the deterioration of the pipes of compressed air plants, for surface treatment, on vacuum pump exhaust, on compressed air motors, and as post-filter for adsorption dryers.
X SERIES - 0,01 MICRONS Oil removing filter capable to separate residual oil and extremely small particles down to 0,01 micron. Maximum contents of residual oil 0,01 mg/m3. It produces air technically free from oil. Used for the protection of control system, pneumatics haulage, painting system and as pre-filter for adsorption
dryers.
Z SERIES - ACTIVATED CARBON ctivated carbon filter for the elimination of oil vapours and odour. When installed, after a (X) grade filter, it lowers the maximum contents of residual oil 0,005 mg/m3. Used in the pharmaceutical industry, for dental applications, in photographic workshops, packaging and galvanic
treatments.

 

info & download

I dati prodotto sono disponibili solo per gli utenti registrati all'area riservata del sito.