The CCS centrifugal type separator offers the advantage of a high efficiency, even with variable flow-rates. It doesn’t require maintenance, it doesn’t clog and it’s able to separate solid particles as well. The cold inlet air is conveyed in the centrifugal type condensate separator. By means of a winged diaphragm, the entering air assumes a high speed rotary motion. Therefore, due the centrifugal force, the condensed particles are projected on the lateral surface, where from they will be collected on the bottom, that is an accumulation reservoir for the separated condensate, the latter being expelled by the drain. All accessories of this range
Feature 1:  Feature 2:  Upper end-cap  Inlet connection  Feature 3:  Feature 4:  Winged diaphragm  Anti-dragged plate  Feature 5:  Feature 6:  Outlet connection  Lower end-cap Model Flow Rate Connections Drain Dimensions [mm] Peso Nl/min Nm³/h scfm IN-OUT Ø A B C D Kg CCS 21 2.100 126 74 G 1" BSP-F G 1/2" BSP-F 190 390 70 114 4.2 CCS 49 4.900 294 173 G 1.1/2" BSP-F G 1/2" BSP-F 200 390 80 114 4.9 CCS 129 12.900 774 456 G 2" BSP-F G 1/2" BSP-F 240 400 90 133 6.9 CCS 165 16.500 990 583 G 2.1/2" BSP-F G 1/2" BSP-F 280 440 115 168 11.2 CCS 210 21.000 1.260 742 DN80 PN16 G 1/2" BSP-F 360 510 130 168 20.6 CCS 315 31.500 1.890 1.112 DN100 PN16 G 1/2" BSP-F 400 570 150 193 28.9 CCS 515 51.500 3.090 1.819 DN125 PN16 G 3/4" BSP-F 440 750 170 219 41.5 CCS 750 75.000 4.290 2.525 DN125 PN16 G 3/4" BSP-F 490 780 190 245 52.4 - Friulair S.r.l. reserves the right to modify, in any moment technical details without notice -