|
| |
| |
 |
 |
Vessel CE
marked in accordance with PED
97/23/EC Directive. ASME
Section VIII Div. 1 standard is also available.
Easy to read DIG04
differential pressure gauge, supplied as standard to monitor
the filter element performance.
Filter body is pre-treated inside and outside with electrophoretic
coating to increase corrosion resistance. External surfaces
are powder coated.
Lower flange is provided with a hinge and handle mechanism to
allow a single operator to open the vessel for replacement.
Condensate drain port G 3/4".
SCG20 automatic
float drain supplied as standard on models FWP,S,X.
Manual drain on models FWZ. |
|
 |
Four grades of filtration (P,S,X and Z) to cover
all requirements for clean compressed air in respect of ISO
8573.1.
Only one cartridge size for each filtration grade covers all
filter models.
Push on element with double o-ring for speedy replacement and
air tight connection.
Screwed tie rod for cartridge fixing in stainless steel.
Each element has double (inner and outer) polyester felt sock
making it suitable for high temperatures and resistant to synthetic
oils.
Stainless steel inner and outer supports for maximum \strength.
Silicon free manufacturing.
|
|
|
| Filter
grade |
Air
quality |
Application
example |
Identification
color |
| Series
P |
|
|
Filter
capable to separate emulsion and particles down to 3 micron. |
Normally
installed on the inlet of dryers. Ideal as pre-filter for on-line
filters (series S – X – Z)
and for vacuum pumps, pneumatic blowing plants. |
 |
| 3
MICRON |
| Series
S |
|
|
Filter
capable to separate particles down to 1 micron, liquid an oil
included. Maximum contents of residual oil 0,1 mg/m³. |
Normally
used on outlet of dryers as (X) grade pre-filter. Used to prevent
the deterioration of the pipes of compressed air plants, for
surface treatment, on vacuum pump exhaust, on compressed air
motors,
and as post-filter for adsorption dryers. |
 |
| 1
MICRON |
| Series
X |
|
|
Oil removing
filter capable to separate residual oil and extremely small
particles down to 0,01 micron. Maximum contents of residual
oil 0,01 mg/m³. It produces air technically free from oil.
|
Used
for the protection of control system, pneumatics haulage, painting
system and as pre-filter for adsorption dryers. |
 |
| 0,01
MICRON |
| Series
Z |
|
|
Activated
carbon filter for the elimination of oil vapours and odour.
When installed, after a (X) grade filter, it lowers the maximum
contents of residual oil 0,003 mg/m³. |
Used
in the pharmaceutical industry, for dental applications, in
photographic workshops, packaging and galvanic treatments. |
 |
ACTIVATED
CARBON |
|
|
|
