Compressed air is a valuable source of power, but it benefits from being clean and free from impurities. For this reason, FRIULAIR has optimized the FT range for compressed air. The filter body in aluminum is anodized outside and inside to prevent corrosion. Filter elements (cartridge) are easy to interchangeable and supplies in four different grade of filtration. The range covers flow rate from 850 Nl/min. up to 42.000 Nl/min. Maximum operating pressure 16 bar. Filters are complete with: Internal float drain ATD03 on models FTP, S, X 008-120 Float drain SCG20 on models FTP, S, X 160-400 Manual drain MDR04 on models FTZ 008-400 All accessories of this range
Four levels of filtration: P 3 MICRONS (green) S 1 MICRONS (red) X 0.01 MICRONS (yellow) Z ACTIVE CARBON (black) Data in the table refer to the working condition written to flank. Inlet air temperature:  35°C Inlet air pressure:  7 barg  Max. working condition Ambient temperature:  60°C Inlet air pressure:  16 barg Inlet air temperature:  120 °C Model Flow Rate Connections Cartridge Dimensions [mm] Weight Nl/min Nm³/h scfm Ø IN OUT Model A B C D Kg FT* 008 850 51 30 G 3/8" T*008 85 187 60 22 0.77 FT* 012 1.200 72 42 G 1/2" T*012 85 187 60 22 0.77 FT* 018 1.850 111 65 G 3/4" T*018 85 256 80 22 0.88 FT* 030 3.300 198 116 G 1" T*030 125 263 100 32 2.2 FT* 055 5.500 330 194 G 1" T*052 125 362 120 32 2.6 FT* 080 8.100 486 286 G 1.1/2" T*080 125 452 140 32 2.9 FT* 120 12.500 750 441 G 1.1/2" T*120 125 643 160 32 3.7 FT* 160 16.800 1.008 593 G 2" T*160 160 695 520 45 7.4 FT* 250 26.000 1.560 918 G 2.1/2" T*250 160 935 770 45 10 FT* 400 42.000 2.520 1.483 G 3" T*400 250 1.170 780 60 25 * = level of filtration - Friulair S.r.l. reserves the right to modify, in any moment technical details without notice - Correction factor for operating pressure changes  Inlet air pressure [barg] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16  Factor 0.25 0.38 0.50 0.65 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13