Compressed air is a valuable
source of power, but it benefits from being clean and free from
impurities. For this reason, FRIULAIR has optimized the FT range
for compressed air. The filter body in aluminum is anodized
outside and inside to prevent corrosion.
Filter elements (cartridge) are easy to interchangeable and
supplies in four different grade of filtration. The range covers
flow rate from 850 Nl/min. up to 42.000 Nl/min. Maximum operating
pressure 16 bar.
Cuts down the footprint for apparatus by installation within
the filter body. Easy installation and maintenance with provision
for operating tests.
Maximum operating pressure:
16 bar
Maximum operating temperature:
80°C
Connection:
1/2" BSP-M
Weight:
65 gr
Total height:
80 mm
External dimensions:
25 mm
Automatic mini float condensate drain
Small size, easy installation directly underneath the filters.
Complete with button for condensate draining test.
Maximum operating pressure:
16 bar
Ambient temperature:
da +5°C a +65 °C
Inlet fixing:
1/8"BSP-M
Outlet fixing:
1/8"BSP-F
Length:
115 mm
Weight:
0.4 Kg
Automatic float condensate drain
Body in cast aluminium, float in stainless steel, manual discharge
valve for operating test.
Maximum operating pressure:
20 bar at 100°C
Inlet fixing:
1/2"BSP-M
Outlet fixing:
1/2" BSP-F
Height:
133 mm
Length:
135 mm
Weight:
0.6 Kg
Automatic timed condensate drain
Drain set with electronic timer. Small dimensions. Easy installation
under the filter.
Controllable pause time. Complete with manual test, voltages available
from 24V a 240V, 50Hz or 60Hz.
Maximum operating pressure:
16 bar
Ambient temperature:
from +5°C to +65 °C
Inlet fixing:
1/2"BSP-M
Outlet fixing:
1/8"BSP-F
Weight:
0.2 Kg
Automatic timed condensate drain
Drain set with electronic timer. Limited overall dimensions. Easy
to be installed. Pause and drain times can be adjusted. Test push-button.
Maximum operating pressure:
16 bar
Ambient temperature:
from +5°C to +65 °C
Inlet fixing:
1/2"BSP-M
Outlet fixing:
Rilsan Ø6x1
Automatic electronic condensate level drain
Automatic condensate drain with level controlled electronic sensor.
It prevents the waste of compressed air and allows the drain of oleos
condensate. It is fit with mechanical filter to protect condensate
drain solenoid valve. Control ald text box.
Maximum operating pressure:
16 bar
Ambient temperature:
from 2°C to 50°C
Inlet fixing:
1/2"BSP-F
Outlet fixing:
4.0 mm
Height:
133.7 mm
Manual Drain
Condensate drain port G 1/2".
Clogging indicator
A simple and economical solution. The filter element is changed
when the colour red appears in the central window.
It can be installed in seconds thanks to the mounting built
into the filter head.
Differential gauge
For line filters series FT, easy to read.
Differential gauge For line filters series FT, easy to read, with alarm
LED.
Differential gauge
Double side easy to read differential gauge with "volt
free" electric contact to send a signal when filter elements
need to be replaced.
